Section 1: General Information
3.3.1.3 Slot
A slot is a labeled physical space in an enclosure into which a FRU is installed. FRUs are
replaced by HP certified service providers.
3.3.2 Identifying
FRUs
FRUs in NonStop S-series servers are identified by their physical location. To locate an FRU, you
need to know:
3.3.2.1 Group
Number
The group number identifies all objects connected through the service processors (SPs)
located on the processor multifunction (PMF). For NonStop S-series servers, this includes
everything in a system enclosure.
3.3.2.2 Module
Number
For Nonstop S-series servers, there is only one module in a group, so the module number is
always
1
.
3.3.2.3 Slot
Number
The slot number identifies a position within a module. The slot number is indicated by a
label beneath the slot.
Group and slot labels help you locate I/O controllers that need service. Some software might show
the location using abbreviations for group, module, and slot. For example, the Subsystem Control
Facility (SCF) storage subsystem might display the location of a PMF or IOMF as:
PMF.GRP-1.SLOT-50
For more information on system organization, group numbering, or labeling for a NonStop S-series
server, refer to the
Nonstop S-Series Planning and Configuration Guide
.
3.3.3
Completing the PMF Configuration Form
If you plan to connect a tape drive to a PMF or IOMF, document the configuration using a
Configuration Form. This form documents configurable entities associated with the connector. It
also provides information about the tape drive to be connected.
Note
: Ensure the IOMF or PMF is terminated on the NonStop S-series server.
3.3.3.1 Enter the product number of the tape drive in the Product Number field. Allowable product
numbers are 5242 and 5242ACL.
HP StorageWorks DAT 72 (Models 5242 and 5242-ACL) User's Guide
18 HP Part Number 528296-03 July 2005
