HP Compaq 6910p, Руководство по техническому обслуживанию и ремонту

Страница: 58 / 168

Expansion memory module
Description Spare part number
2048-MB (667-MHz, PC2-5300, 1-DIMM) 446430-001
1024-MB (667-MHz, PC2-5300, 1-DIMM) 446429-001
512-MB (667-MHz, PC2-5300, 1-DIMM) 446431-001
Before removing the expansion memory module, follow these steps:
1
. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
. Disconnect all external devices connected to the computer.
3
. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4
. Remove the battery (see Battery on page 42 ).
Remove the expansion memory module:
1
. Loosen the Phillips PM2.0×5.0 captive screw (1) that secures the memory module compartment cover
to the computer.
2
. Lift the right side of the cover (2) , swing it to the right, and remove the cover. The memory module
compartment cover is included in the Plastics Kit, spare part number 446439-001.
3
. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The edge of the module opposite the slot rises away from the computer.)
50 Chapter
4
Removal and replacement procedures