HP Compaq 6910p, Руководство по техническому обслуживанию и ремонту

Страница: 137 / 168

8
Backup and recovery in
Windows Vista
Creating recovery discs
After setting up the computer for the first time, be sure to create a set of recovery discs of the full factory
image. The recovery discs are used to start up (boot) the computer and recover the operating system and
software to factory settings in case of system instability or failure.
Note the following guidelines before creating recovery discs:
●
You will need high-quality CD-R, DVD-R, or DVD+R discs (purchased separately).
NOTE: Read-write discs, such as CD-RW and DVD±RW discs, are not compatible with HP Backup
& Recovery Manager.
●
The computer must be connected to AC power during the process.
● Only one set of the recovery discs can be created per computer.
●
Number each disc before inserting it into the optical drive of the computer.
● If necessary, you can cancel the disc creation before you have finished creating the recovery discs.
The next time you select Create a set of recovery discs (Recommended) , you will be
prompted to continue the disc creation.
To create a set of recovery discs:
1
. Select Start > All Programs > HP Backup & Recovery > Backup & Recovery
Manager .
2
. Click Next .
3
. Click Create a set of recovery discs (Recommended) , and then click Next .
4
. Follow the on-screen instructions.
Creating recovery discs 129