Hard drive
Description
Spare part number
160-GB, 5400-rpm hard drive
443920-001
120-GB, 5400-rpm hard drive
443919-001
80-GB, 7200-rpm hard drive
445939-001
80-GB, 5400-rpm hard drive
443918-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 52
).
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.0×5.0 screws
(1)
that secure the hard drive cover to the computer.
3.
Lift the left side of the hard drive cover
(2)
, swing it to right, and remove the cover.
NOTE:
The hard drive cover is included in the Plastics Kit, spare part number 443905-001.
4.
Loosen the Phillips PM2.5×13.0 hard drive retention screw
(1)
that secures the hard drive to the
computer.
56
Chapter 4 Removal and replacement procedures
Содержание Compaq 6710b
