HP C7745NB - SureStore DLT Tape Autoloader 1/9, Руководство пользователя

Страница: 16 / 63

Overview and Preparation for Upgrade
Removing a Rackmounted Autoloader (if necessary)
Chapter 1 1-6
Removing the Trim Bracket and Filler Panel
It is not necessary to remove the trim bracket and filler panel in order to
upgrade your autoloader, however, it is necessary if you are returning the
autoloader.
To remove the trim bracket and filler panel, do the following:
1. Remove the trim bracket from the right side of the autoloader by
lifting up gently on the bracket until it separates from the autoloader.
Guide pins keep the bracket in place (see Figure 1-3).
2. Remove the filler panel or trim bracket from the left side by gently
lifting up on the panel until it separates from the autoloader. Guide
pins keep the panel in place (see Figure 1-3).
Figure 1-3 Removing the Trim Bracket and Filler Panel