HP BB118BV - StorageWorks Data Protector Express Package, Руководство пользователя, Страница: 45 / 365

Chapter 2: Creating Jobs with Data Protector Express 27
Remove Media: Create a job that removes media from a library. You might use this wizard to schedule a
job that removes several media from a library outside the normal business hours.
Clean Device: Create a job that inserts a cleaning cartridge into a library device and runs it through a
cleaning cycle. You might use this wizard to schedule a cleaning cycle on a library device outside the
normal business hours. This wizard is available only for devices that support automatic cleaning.
Identify Media: Create a job that identifies the media currently loaded in a device. You might use this
wizard to routinely identify media in a library so that the latest information is available to Data Protector
Express.
Retension Media: Create a job that rewinds the selected media to improve its tension. Media that has been
wound and rewound several times loses its tension and is not as efficient during backup jobs.
Retensioning media improves its overall life as well as the accuracy of backups.
Restore Catalog: Create a job that restores the catalog for the Data Protector Express management domain
from any available media.
D2D device wizards
Create Virtual Library: Create a virtual library device and assign a storage folder to it. If you intend to
make use of D2D2Any backups you must create a virtual device.
Disaster recovery wizards
Disaster recovery wizards help you perform disaster recovery preparation tasks that fit the most common
situations. For more information about disaster recovery operations, see
Disaster Recovery
on page 267.
Data Protector Express provides the following disaster recovery wizard:
Make Bootable CD: Use this wizard to create a bootable compact disk that you can use to start your system
in the event of a data disaster. Each machine should have a bootable CD, and bootable media should be
recreated when a PC desktop configuration is altered; that is when the operating system is modified or
hardware changes occur on the PC desktop.
Custom wizards
To create a custom wizard, follow these steps.
1. Open the
Administration
desk bar, select
Catalog
and locate
Templates
.
2. Open the
.default
template and select either
Character Based UI
or
Graphical Based UI.
3. Double-click
Desk Bar, Favorites,
and then
Wizards
.
4. Right-click in the details area and select
New …
.
The
New Object
screen appears.
5. Enter a name for the wizard, select
Command
for the object type and click
OK
.
6. Set up the new wizard as follows:
•
On the
General
property page, enter a description and other information
•
On the
Command
property page, select the command that this wizard will run; if desired, select a
specific on which to run the command
•
On the
Permissions
property page, select the users and groups that may run the wizard
7. Click
Apply
or
OK
to save your changes.