HP BB118BV - StorageWorks Data Protector Express Package, Руководство пользователя, Страница: 283 / 365

Appendix C - About the Data Protector Express Service 265
•
Manual: Select Manual if you intend to start the Data Protector Express service each time you
want it to run. You can run it from a command prompt or by starting it on the Windows Services
screen.
•
Disabled: Select
Disabled
if you want to stop the Data Protector Express service indefinitely.
Once disabled, all commands are disabled for the service, including the ability to start the service.
Service status: The status of the Data Protector Express service is displayed below the Startup type. To
changes the status, use one of the following commands:
•
Start: Select this command to start the Data Protector Express service. The
Start Pending
message appears, and the status of the service changes to
Started
. Your backup jobs will
automatically start as scheduled.
•
Stop: Select this command to stop the Data Protector Express service. The
Stopping
message
appears, and the status of the service changes to blank. Your backup jobs will not automatically
start as scheduled. Selecting this option does not affect the
Startup type
option.
NetWare and the Data Protector Express Agent
The Data Protector Express agent extends the basic Data Protector Express service functionality to
NetWare. Like the Data Protector Express service, it can be loaded when the system is started and will
run in the background.
NOTE:
The Data Protector Express agent and Data Protector Express cannot run at the same time. Therefore, you
must stop one before you can start the other.
Running the Data Protector Express Agent
To automatically run the Data Protector Express agent each time the system is restarted, add the following
line to the end of the
AUTOEXEC.NCF
file:
load dpagent
To manually run the Data Protector Express agent, type load
dp
agent from the console prompt and press
Enter .
Once loaded, the Data Protector Express agent status appears on the screen.
Stopping the Data Protector Express Agent
To manually stop the Data Protector Express agent:
1. Use Alt-Esc to display the Data Protector Express
Agent
screen.
2. Press Esc .
3. When the Exit Data Protector Express message appears, select
Yes
and press
Enter
.
Linux and the Data Protector Express Daemon
On Linux platforms, the Data Protector Express service, or daemon, is designed to run automatically each
time the system is restarted.
The daemon program (
dplinsvc
) is located in the Data Protector Express directory. To access the
service in the default installation directory you would type
cd /usr/local/hp/dpx/dplinsvc
and press Enter .