DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 92
f.
Remove the flex track 2.
To replace the component, reverse the removal procedure.
Two-slot PCI riser board
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
1.
Power down the server (on page
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Remove the server from the rack (on page
).
4.
Remove the access panel ("
).
5.
Remove the two-slot PCI riser cage ("
).
6.
Remove any existing expansion board from the riser board.
