DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 64
To replace the component:
1.
Install the processor. Verify that the processor is fully seated in the processor retaining bracket by
visually inspecting the processor installation guides on either side of the processor.
THE PINS ON THE
SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED
.
CAUTION:
THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED.
To
avoid damage to the system board, do not touch the processor or the processor socket contacts.
CAUTION:
Do not press down on the processor. Pressing down on the processor may cause
damage to the processor socket and the system board. Press only in the area indicated on the
processor retaining bracket.
2.
Close the processor retaining bracket. When the processor is installed properly inside the processor
retaining bracket, the processor retaining bracket clears the flange on the front of the socket.
