HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive, Руководство по техническому обслуживанию и ремонту

Страница: 38 / 120

Message Type
Description Action
04 ENABLE VOLUMES ?
'<'=NO, '>'=YES
User input
An issue has been found
with all of the con fi gured
volumes that may result in
data loss. The exact nature
of the issue is detailed in a
previous display message.
Yes = the volume is enabled
(regardless of the issue.) The
volume attempts to return to
its normal operating state
and the data is accessible.
No = not selecting any
option within the time-out
period = the volume remains
disabled. The volume stays
in the failed state and the
data is not be accessible.
During this time, the user can
attempt to fi x the issue.
no input = No
05 SYSTEM NAME
<name>
Informational The user assigned name for
the MSA system. This name
can be assigned using
the Array Con fi guration
Utility (ACU) or the MSA
Command Line Interface
(MSA-CLI).
06 RESTARTING
SYSTEM
Informational
The system is being
restarted.
07 CLONE FIRMWARE?
'<'=NO, '>'=YES
User input
In dual-controller
con fi gurations only,
the array controller has
detected a fi rmware version
mismatch with the two
controllers and wants to
copy the fi rmware from the
other controller onto this
controller. Firmware on
both controllers must match.
Scroll through and read the
messages on both controller
LCD panels to con fi rm the
currently installed fi rmware
versions on the controller.
Then, respond appropriately
to the prompt.
< = No, do not clone.
> = Yes, proceed with the
cloning.
no input = Yes, proceed with
the clone.
During a restart of the MSA
chassis, the controller with
the latest version of fi rmware
is cloned.
If a new or replacement
controller is hot-added,
the fi rmware on the already
installed and active controller
is cloned, even if less recent.
08 CONTROLLER TOO
OLD NOT SUPPORTED
Error
During startup, the fi rmware
examines the hardware to
ensure that it is supported
for use with the version of
installed fi rmware.
This controller is not
supported.
Contact HP support.
09 PILOT 2 CONTRLR
NOT SUPPORTED
Error
During startup, the fi rmware
examines the hardware to
ensure that it is supported
for use with the version of
installed fi rmware.
This controller is not
supported.
Contact HP support.
38
LCD panel and message descriptions