HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Скачать руководство пользователя страница 32

Страница: 32 / 120

•

ACU website:

http://h18000.www1.hp.com/products/servers/priliantstorage/

softwaer-management/acumatrix/index.html

Array Con

guration Utility Command Line Interface (ACU-CLI)

overview

The Array Con

guration Utility Command Line Interface (ACU-CLI) is a command line user interface used

to con

gure an array controller and its storage.

The ACU-CLI is supported for use in Windows, Linux, and HP-UX environments and can run locally

through a browser, remotely through HP Systems Insight Manager (HP-SIM), or of

ine from the MSA

Support Software CD.
For more information about the ACU-CLI, see the following:

•

ACU-CLI section of the array con

guration reference guide, available on the Documentation CD or the

Technical documentation page of the MSA1000 website:

http://www.hp.com/go/msa1000

•

ACU-CLI text

le, available in the ACU-CLI folder on the Support Software CD.

MSA Command Line Interface (MSA-CLI) overview

The MSA Command Line Interface (MSA-CLI) is built into the MSA array controller

rmware and offers a

command level method of con

guring, managing, and monitoring the array controller and its storage.

The MSA-CLI is accessed through a host computer connected to the customized RJ-45Z serial port on the

front of the MSA controller.
This interface is provided for system administrators who prefer this method of system management,

instead of a graphical user interface. All supported operating systems can access the CLI.
Sample tasks include: con

guring the storage units (LUNs), limiting access to the storage, and viewing

controller and storage setup and status information.

Array Diagnostics Utility (ADU) overview

The HP Array Diagnostic Utility (ADU) is a web-based application that creates a report on all HP

storage controllers and hard drives. This report provides vital information to assist in identifying faults or

conditions that may require attention.
Collected information includes:

•

Hard drive errors

•

Intermittent problems

•

Pre-failure Noti

cation

•

Controller, array, and logical drive problems

•

Third-party, possible counterfeit, or non-HP hard drives

•

Array controller and hard drive

rmware versions

•

Length of hard drive service

•

Physical and logical drive con

guration information

•

Serial numbers of hard drives and array controllers

The ADU is installed on a server in the network and is provided on the MSA Support Software CD.

HP Systems Insight Manager (HP-SIM) overview

HP Systems Insight Manager (HP-SIM) is a web-based application that allows system administrators

to accomplish normal administrative tasks from any remote location, using a web browser. HP-SIM

provides device management capabilities that consolidate and integrate management data from HP and

third-party devices. HP-SIM reports hardware fault conditions (both failure and pre-failure) and collects

Available diagnostic tools

Содержание AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

























































































































Результаты поиска

Содержание AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Отзывы:

Похожие инструкции для AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Бренды по названию

Популярные бренды

HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Отзывы:

Похожие инструкции для AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Бренды по названию

Популярные бренды