HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Скачать руководство пользователя страница 103

Страница: 103 / 120

10 Array controller

rmware

Each array controller contains Read-Only Memory (ROM), which holds the

rmware that operates the

controller. In dual-controller con

gurations, the two controllers must execute the same

rmware version.

Included in this section:

• Determining the currently-installed

rmware version

• Updating controller

rmware

• Cloning controller

rmware

• Recovering corrupted

rmware

NOTE:

After updating MSA controller

rmware, be sure to check the status of the MSA for unexpected issues.

Verify the status of the connections, de

ned pro

le types, redundancy settings, and storage con

guration.

Determining the currently installed

rmware version

To determine the

rmware version currently running on a controller, do one of the following:

•

On the MSA controller LCD panel, use the arrow keys to scroll backwards through the messages until

the

ARRAY CONTROLLER FIRMWARE VER <version>

message is displayed.

•

Each time the MSA controller is restarted, view the

rst message that displays the

rmware version.

•

In the CLI, use the

SHOW VERSION

command.

Updating controller

rmware

Because the MSA can operate in a variety of operating system environments, several updating methods

are available. To perform an update, obtain the following items from the MSA website:

•

Controller

rmware (on the

Software, Firmware & Drivers

page.)

•

Firmware updating guide (on the

Technical Documents

page.)

Cloning controller

rmware

NOTE:

Cloning is possible only in dual-controller con

gurations.

Each time a system with two controllers is powered on or restarted, or if a second controller is hot-plugged

into a single-controller con

guration, the

rmware versions on the controllers are compared. If the

rmware versions on the two controllers are different, the array controller LCD panel prompts to clone the

rmware from one controller to the other, so that they have the same version.

The determination as to which

rmware version is used is based on the following criteria:

•

If the MSA is being powered up with both controllers inserted, then the most recent version of

rmware

is used regardless of which controller it resides on.

•

If the MSA is already operating and an optional controller is hot-plugged, then the version of

rmware

that is on the original (non-hot-plugged) controller is used regardless of its version. This ensures that

any host-initiated I/O to the controller is not interrupted.

maintenance and service guide

103

Содержание AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

























































































































Результаты поиска

Содержание AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Отзывы:

Похожие инструкции для AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Бренды по названию

Популярные бренды

HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Отзывы:

Похожие инструкции для AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive

Бренды по названию

Популярные бренды