Table B-4 Terminal/Printer Cable with RTS/CTS Handshaking
(continued)
DB-25 Male (Peripheral)
DB-25 Female (Card End)
DSR+DCD
6+8
Connected to
20
DTR
GND
Shell
Connected (via
shield) to
Shell
GND
IMPORTANT:
Some terminal or printer manufacturers may use different methods of flow
control. Consult your documentation for specific wiring requirements.
DB-25 Fully-Wired Terminal/Printer Cable
The cabling shown in
supports most serial terminals or printers with either software
or hardware handshaking. This cable works with any RoHS DB25 serial port. This cable works
with either an AD278A connector or an AD281A port module.
lists the pin-out connection between the DB25 adapter and the DB25 terminal/printer
with software or hardware handshaking.
Table B-5 Terminal/Printer Cable for Software (XON/XOFF) or Hardware (DTR) Handshaking
DB-25 Male (Terminal/Printer)
DB-25 (Card End)
Signal
Pin
Pin
Signal
CTS
5
Connected to
4
RTS
GND
Shell
Connected to
Shell
GND
RxD
3
Connected to
2
TxD
TxD
2
Connected to
3
RxD
SG
7
Connected to
7
SG
DTR
20
Connected to
5
CTS
DCD+DSR
8+6
Connected to
20
DTR
RTS
4
Connected to
8+6
DCD+DSR
IMPORTANT:
Some terminal or printer manufacturers may use different methods of flow
control. Consult your documentation for specific wiring requirements.
DB-25 Modem Cable
To connect a DB-25 equipped asynchronous adapter to a modem, use a standard straight-through
cable. A straight-through cable must have a DB-25 female connector at the AD278A fan-out end
or the AD281A port module end, and a DB-25 male connector at the modem end. All 25 pins are
connected, 1 to 1, 2 to 2, 3 to 3 and so on. Use a shielded cable, and connect pin 1 of each connector
to the cable shield.
RS-232 Asynchronous: RJ-45
This section provides the pin diagram for RJ-45 cable.
RJ-45 Pin Assignments
shows the pin diagram for RJ45 connector.
RS-232 Asynchronous: RJ-45
35
Содержание AD278A
Страница 14: ...14 ...
Страница 42: ...42 ...
Страница 47: ...Declaration of Conformity Declaration of Conformity 47 ...
Страница 48: ...Declaration of Conformity 48 Port Naming and Numbering Conventions ...