HP A7340A - Surestore FC 1Gb/2Gb Switch 16B, Руководство по установке

Страница: 53 / 120

Installing the SAN Switch 2/16
53 SAN Switch 2/16 Version 3.1.x Installation Guide
5. Assemble the two inner rails (one on each side) to the switch using ten
#8-32 x 3/16-inch Phillips pan-head screws with captive star lock washers as
shown in
Figure 19 .
Caution: Do not use any other screws other than the ones provided. Use of
any longer lengths can cause damage to internal components
The inner rails work for all three SAN switches—SAN Switch 2/32, SAN Switch
2/16, and SAN Switch 2/8. The mounting holes in the inner rails are marked with
32, 16, and 8. Use the appropriately labeled mounting holes when installing the
inner rails on a switch. For example, to install the inner rails on the SAN Switch
2/16, use the mounting holes labeled 16.
Note:
The rail kit provides a total of fourteen #8-32 x 3/16-inch screws for
assembling the inner rails. Each switch requires a different number of these
screws. For example,
Figure 19 shows the an inner rail being attached to the SAN
Switch 2/16 with five screws. Attaching both inner rails requires ten screws.
Figure 19: Assembling the inner rails