HP A7340A - Surestore FC 1Gb/2Gb Switch 16B, Руководство по установке

Страница: 37 / 120

Installing the SAN Switch 2/16
37 SAN Switch 2/16 Version 3.1.x Installation Guide
Note: Position the square alignment washers onto the Phillips head 10-32 x 3/8-inch
screws, as described in step 3. The square alignment washers are mandatory for
proper switch alignment.
7. Secure each L-bracket and 3-hole bar nut to the rack’s rails with two Phillips
head 10-32 x 3/8-inch screws (and attached square alignment washers),
see
Figure 6 .
Figure 6: Attaching the outer slide rails to the HP 9000 Series rack
1
Phillips head 10-32 x 3/8-inch screw
2
3-hole bar nut
3
Outer slide rail
4
L-Brackets
5
Power cord clip (1 of 6)
[1] Select this graphic frame.
[2] Select
File.
[3] Select Import.
[4] Select File.
[5] Choose the appropriate graphic file name.
[6] Make sure you’ve checked the
Copy Into Document.
[7] Select Import. Position the illustration as required.
Delete this set of instructions
[8] Adjust the size of the outer graphic frame as required.
SHR-2478A
1
3
4
5
2