18
x
The A10508-V has two cable management brackets—the signal cable management brackets are
installed at the upper part of the switch, and the power cable management brackets are installed at
the lower part of the switch. They are installed in the same way. For more information, see
Figure 11
.
x
The power cable management bracket installation procedure for the A10508 is the same as
A10508-V.
x
The power cable management brackets of the A10504 have a slightly different structure, and
installed in a similar procedure. For more information, see
Figure 12
.
To install a cable management bracket:
1.
Unpack the cable management brackets.
2.
Attach the cable management bracket to the chassis, and align the screws with the screw holes on
the chassis.
3.
Fasten the screws.
Figure 11 Install cable management brackets on an A10508-V
(1) Attach the cable management bracket to the
chassis
(2) Screw holes for installing the cable management
bracket
(3) Screws for fixing the cable management bracket to
the chassis
(4) Signal cable management bracket (installed at the
upper part of the chassis)
(5) Power cable management bracket (installed at the lower part of the chassis)
