User’s Guide
9–16
Using the Wireless LAN
LEAP Registration Utility
Cisco LEAP is an 802.1X authentication protocol that uses a
username and password pair to authenticate access by a wireless
client to a wireless router.
Use of the LEAP registration utility is required to log on to a
LEAP-authenticated network. Most of the other types of secure
networks are set up automatically by the iPAQ WLAN connection
software. However, accessing a LEAP-authenticated network
requires initial registration using this utility. Once you have
authenticated and accessed this type of network, a connection
can take place automatically whenever you access the
LEAP-authenticated network.
To register the LEAP utility:
1. Tap
Start > Settings > System
tab
> LEAP.
2. Tap
New
to create a LEAP profile. A LEAP profile must
contain the following information:
❏
SSID
❏
Username
❏
Password
❏
Domain
❏
Authentication type required by the LEAP server
3. Tap
Modify
to make changes to the selected LEAP profile
from the Wireless LEAP list. Changes to the LEAP profile
can also be made by tapping on an entry in the Wireless
LEAP list.
4. Tap
Delete
to delete the selected LEAP profile from the
Wireless LEAP list.
343434-001.book Page 16 Tuesday, September 9, 2003 12:56 PM
