Using the Wireless LAN
User’s Guide
9–13
6. In the
Host name/IP
box, enter the VPN server name or
IP address.
7. Next to
VPN type,
tap the type of authentication to use with
your device
(IPSec/L2TP or PPTP).
If you aren’t sure
which option to choose, ask your network administrator.
8. Tap
Next.
9. If you selected
IPSec/L2TP
on the previous screen, tap the
type of authentication. If you select
A pre-shared key,
enter
the key provided by your network administrator, then tap
Next.
Note:
If you selected
PPTP
in the previous screen, this step is
skipped.
10. Enter the user name, password, and domain name provided
by your network administrator.
Note:
If a domain name was not provided, you may be able to
connect without entering one.
11. To change advanced settings, tap the
Advanced
button.
Note:
You will not need to change advanced settings unless:
■
The server to which you are connecting does not use
dynamically-assigned IP addresses and you need to enter
your TCP/IP settings,
or
■
You need to change server DNS or WINS settings.
12. Tap the
Finish
button.
343434-001.book Page 13 Tuesday, September 9, 2003 12:56 PM
