HP 3C590-TPO, Руководство по установке

Страница: 9 / 44

2 Connecting to a Netware 4.11 Server
Windows for Workgroups
2 Connecting to a Netware 4.11 Server
Windows for
Workgroups
Requirements
• HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.
• 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.1a.
DOS ODI -
Vectra VL8 Driver File Name: 3C59X.COM Size: 55KB Date:10/04/96
• Vectra VL7 and VE7/VE8 Driver File Name: EL59X.DOS Size:27KB
Date: 10/04/96
• DOS and MS-Windows for Workgroups 3.11 media.
• Novell Netware server 4.1 that supports Net BEUI, NWLink IPX/SPX, and
NWLink NetBIOS transfer protocols.
• Netware client for DOS and MS-Windows.
Device Configuration
• Network Driver Optimization Normal
• Full Duplex Disabled
• Boot PROM Disabled
• Media Type 10BASE-T
Procedure
1 With the HP Vectra turned off install the 3COM Etherlink III 3C509-B
adapter card into an ISA slot.
2 Power on the machine and allow it to boot to a DOS prompt.
3 Insert the 3COM drivers diskette (ver. 5.0 downloaded from 3COM’s
website) and execute 3C59XCFG.EXE.
Vectra VL8 Vectra VL7 Vectra VE7/VE8
I/O Base Address FCC0h (PCI) FCC0h (PCI) DC00h (PCI)
Interrupt Request
Level
10 (PCI) 9 (PCI) 10 (PCI)