HP 3C590-TPO, Руководство по установке

Страница: 13 / 44

2 Connecting to a Netware 4.11 Server
Windows 95 SR2
Windows 95 SR2 Requirements
• HP Vectra with Windows 95 SR2 installed.
• 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.1a.
Vectra VL8 and VL7 Driver Name: EL59X.VXD Size: 38KB Date: 1/07/97
• Vectra VE7/VE8 Driver: Windows 95 Embedded
• Windows 95 SR2 media. (If you have an HP preloaded HDD, the media is
located at C:\Masters\Win95\System\Cabs\)
• Novell Netrware 4.11 server that supports Net BEUI, NWLink IPX/SPX,
and NWLink NetBIOS transfer protocols.
Device Configuration
• Network Driver Optimization Normal
• Full Duplex Disabled
• Boot PROM Disabled
• Media Type 10BASE-T
Procedure
1 With the HP Vectra turned off install the 3COM Etherlink III 3C590
adapter card into a PCI slot.
2 Power on the machine and restart Windows 95 SR2 in MS-DOS Mode.
3 Insert the 3COM drivers diskette and execute “A:\3C59XCFG.EXE.”
4 Select “CONFIGURE NIC,” and verify the resource settings listed above
under the heading “Device Configuration.”
5 If changes are required, save those changes and exit.
6 Remove the 3com cards driver diskette and restart the machine.
7 Windows 95 SR2 should automatically recognize the 3COM 3C590
ethernet card.
Vectra VL8 Vectra VL7 Vectra VE7/VE8
I/O Base Address FCC0h (PCI) FCE0h (PCI) DC00h (PCI)
Interrupt Request
Level
10 (PCI) 9 (PCI) 10 (PCI)