HP 3C590-TPO, Руководство по установке

Страница: 30 / 44

4. Connecting to a Windows NT Server 4.0
Windows for Workgroups Ver. 3.11
8 After windows loads, open the “NETWORK” program group, and double-
click on “Network Setup” icon.
9 Select “Networks” in the “Network Setup” dialog box.
10 Click on the “Install Microsoft Windows Network:” option, and click “OK.”
11 Click on “Drivers” from the “Network Setup” dialog box, and click on “Add
Adapter.”
12 Click “OK” to accept the default choice of “Unlisted or Updated Network
Adapter.”
13 Set the path to “A:\NDIS\WFW” in the “Install Driver” dialog box, and then
insert the 3COM 3C590 drivers disk.
(If you have an HP preloaded HDD, set path to
“C:\Masters\LanDrv\3C590\NDIS\WFW”)
14 Click “OK” on “Install Driver” dialog box.
15 Select “3Com Fast Etherlink / Etherlink III BusMaster (3C59X)” in the
“Unlisted or Updated Network Adapter” dialog box, and click “OK.”
16 Verify that the “3Com Fast Etherlink / Etherlink III BusMaster (3C59X)“
is selected in “Network Drivers.”
17 Accept the applicable Network Protocols, and then click on “CLOSE.”
• 3Com Fast EtherLink / EtherLink III BusMaster (3C59X)
• Microsoft NetBEUI IPX/SPX Compatible Transport with NetBIOS
(If you do not have the required information, contact your network ad-
ministrator)
18 At the “Network Setup” dialog box, click on “OK”.
19 Specify your User Name, Workgroup, and Computer Name in “Microsoft
Windows Network Names” dialog box, and click on “OK”.
20 When prompted, type the path “A:\NDIS\DOS” in the “Install Driver”
dialog box, and then insert the 3COM 3C590 drivers disk into the floppy
drive, and click “OK.”
(If you have an HP preloaded HDD, set path to
“C:\Masters\LanDrv\3C590\NDIS\DOS”)
21 Finish the network card installation by clicking on “OK” in the “Network
Setup” message.
22 To complete the installation, click on “Restart Computer” in the