manualshive.com logo in svg

HP 340 G3, Руководство по техническому обслуживанию и ремонту

Новый ноутбук HP 340 G3 поставляется с подробным "Руководством по техническому обслуживанию и ремонту", которое можно бесплатно скачать с {веб-сайта}. Это руководство поможет вам осуществить профессиональное обслуживание вашего устройства и устранить любые неполадки. Не забудьте заглянуть на наш {веб-сайт} для загрузки!

Поделиться
Скачать
background image

13 Statement of memory volatility

The purpose of this chapter is to provide general information regarding nonvolatile memory in HP Business 
PCs. This chapter also provides general instructions for restoring nonvolatile memory that can contain 
personal data after the system has been powered off and the hard drive has been removed.

HP Business PC products that use Intel®-based or AMD®-based system boards contain volatile DDR memory. 
The amount of nonvolatile memory present in the system depends upon the system configuration. Intel-
based and AMD-based system boards contain nonvolatile memory subcomponents as originally shipped from 
HP, assuming that no subsequent modifications have been made to the system and assuming that no 
applications, features, or functionality have been added to or installed on the system.

Following system shutdown and removal of all power sources from an HP Business PC system, personal data 
can remain on volatile system memory (DIMMs) for a finite period of time and will also remain in nonvolatile 
memory. Use the steps below to remove personal data from the PC, including the nonvolatile memory found 
in Intel-based and AMD-based system boards. 

NOTE:

If your tablet has a keyboard base, connect to the keyboard base before beginning steps in this 

chapter.

Current BIOS steps

1.

Follow steps (a) through (l) below to restore the nonvolatile memory that can contain personal data. 
Restoring or reprogramming nonvolatile memory that does not store personal data is neither necessary 
nor recommended.

a.

Turn on or restart the computer, and then press 

esc

 while the "Press the ESC key for Startup Menu" 

message is displayed at the bottom of the screen.

IMPORTANT:

If the Main menu displays Restore Defaults instead of Apply Factory Defaults and 

Exit, go to 

Legacy BIOS Steps on page 88

.

NOTE:

If the system has a BIOS administrator password, enter the password at the prompt.

b.

Select Main, select Apply Factory Defaults and Exit, and then select Yes to load defaults.

The computer will reboot.

c.

During the reboot, press 

esc

 while the “Press the ESC key for Startup Menu” message is displayed 

at the bottom of the screen.

NOTE:

If the system has a BIOS administrator password, enter the password at the prompt.

d.

Select the Security menu, select Restore Security Settings to Factory Defaults, and then select 
Yes to restore security level defaults.

The computer will reboot.

e.

During the reboot, press 

esc

 while the “Press the ESC key for Startup Menu” message is displayed 

at the bottom of the screen.

NOTE:

If the system has a BIOS administrator password, enter the password at the prompt.

f.

If an asset or ownership tag is set, select the Security menu and scroll down to the Utilities menu. 
Select System IDs, and then select Asset Tracking Number. Clear the tag, and then make the 
selection to return to the prior menu.

87

Содержание 340 G3

















































































































Отзывы:

Нет отзывов

Похожие инструкции для 340 G3

NEO 2 Quick Manual preview
2
Бренд: NEO Страницы: 31
NEC VERSA SX HARD DISK DRIVE Upgrade Manual preview
VERSA SX HARD DISK DRIVE
Бренд: NEC Страницы: 6
NEC Versa LX Product Manual preview
Versa LX
Бренд: NEC Страницы: 46
NEC Versa LX User Manual preview
Versa LX
Бренд: NEC Страницы: 96
PORT DESIGNS BUNDLES S16 OPTICAL MOUSE WIRED Product Sheet preview
BUNDLES S16 OPTICAL MOUSE WIRED
Бренд: PORT DESIGNS Страницы: 1
EUROCOM racer 4w User Manual preview
racer 4w
Бренд: EUROCOM Страницы: 346
Alienware M14X Mobile Manual preview
M14X
Бренд: Alienware Страницы: 124
Acer Aspire 5500 Manual Do Utilizador preview
Aspire 5500
Бренд: Acer Страницы: 92
Fujitsu LifeBook P5010 Bios Manual preview
LifeBook P5010
Бренд: Fujitsu Страницы: 26
Fujitsu LIFEBOOK P3110 Operating Manual preview
LIFEBOOK P3110
Бренд: Fujitsu Страницы: 75
Fujitsu LifeBook P1500 Disassembly preview
LifeBook P1500
Бренд: Fujitsu Страницы: 10
Fujitsu Lifebook P1510D Bios Manual preview
Lifebook P1510D
Бренд: Fujitsu Страницы: 25
Fujitsu Lifebook P7000 series User Manual preview
Lifebook P7000 series
Бренд: Fujitsu Страницы: 120
Fujitsu LifeBook P2110 Manual preview
LifeBook P2110
Бренд: Fujitsu Страницы: 100
Fujitsu LIFEBOOK Notebook User Manual preview
LIFEBOOK Notebook
Бренд: Fujitsu Страницы: 94
Fujitsu Lifebook P1510 User Manual preview
Lifebook P1510
Бренд: Fujitsu Страницы: 218
Fujitsu LifeBook P5020 User Manual preview
LifeBook P5020
Бренд: Fujitsu Страницы: 122
Fujitsu LifeBook P3010 User Manual preview
LifeBook P3010
Бренд: Fujitsu Страницы: 132

Бренды по названию

Популярные бренды

Загрузить еще бренды