manualshive.com logo in svg

HP 3000 99x Family, Руководство по установке, Страница: 89 / 173

Поделиться
Скачать
HP 3000 99x Family Скачать руководство пользователя страница 89

Chapter 3

3-41

Installation

The Console

a. If you don't see a window labeled "Console ldev-20", the window may be "minimized"

(displayed only as an icon). Turn the icon to a full-sized window, by double-clicking
on the icon. ("Double-clicking" means that you move the mouse cursor over the
object, then press the left mouse button twice in rapid succession.) If nothing
happens, try double-clicking again.

b. If the console window has been accidentally closed, you can always get a new one by

double-clicking on the icon labeled "Console" in the Program Manager start-up
group.

Figure 3-20

The ldev-20 Window on the OpenView Console

Exiting OpenView

To exit the OpenView program, follow of one of the standard procedures for exiting
Windows. For example:

1. In the upper left hand corner of the window labeled "Program Manager", there is a box

containing a minus sign (-). Move the mouse cursor to this box, then double-click the left
mouse button.

2. You are prompted whether you want to close the Windows session. Click the mouse once

in the box labeled "OK".

3. You are returned to the C:\> prompt.

Содержание 3000 99x Family














































































































































































Отзывы:

Нет отзывов