manualshive.com logo in svg

HP 268 Pro G1 MT, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP 268 Pro G1 MT Скачать руководство пользователя страница 75

Table 6-3

  Computer Setup—Advanced (for advanced users) (continued)

Option

Heading

Increase Idle Fan Speed(%)

Sets idle fan speed percentage. This setting only changes the minimum fan speed. The fan is still 
automatically controlled.

Port Options

SATA0

Lets you disable the connector. Default is enabled.

SATA1

Lets you disable the connector. Default is enabled.

Rear USB ports

Lets you disable the ports. Default is enabled.

Right USB ports

Lets you disable the ports. Default is enabled.

USB Legacy Port Charging

Lets you enable USB charging port capability when the computer is in hibernate or shutdown mode. Default 
is enabled.

USB Type-C Downstream Charging

Lets you enable USB charging port capability when the computer is in hibernate or shutdown mode. Default 
is enabled.

Restrict USB Devices

Specify the following categories of USB devices to enable:

●

Allow all USB devices (default)

●

Allow only keyboard and mouse

●

Allow all but storage devices and hubs.

When some devices are restricted, the system will disable USB ports that do not meet the allowed 
criteria. This feature is usually combined with similar policies within the operating system since USB devices 
can be moved to different ports. The ports disabled by the BIOS will remain disabled until the system is 
restarted.

USB Type-C Controller Firmware Update

Default is enabled.

Option ROM Launch Policy

These policies control whether Legacy Option ROMs or UEFI drivers are loaded. Default is All UEFI.

Configure Option ROM Launch Policy

●

All legacy

●

All UEFI

●

All UEFI except video

Power Management 
Options

Runtime Power Management (enable/disable)

Allows certain operating systems to reduce processor voltage and frequency when the current software load 
does not require the full capabilities of the processor. Default is enabled.

Extended Idle Power States (enable/disable)

Allows certain operating systems to decrease the processors power consumption when the processor is idle. 
Default is enabled.

Computer Setup (F10) utilities

67

Содержание 268 Pro G1 MT











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды