HP 1810-24 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 71

background image

To display the Trunk page, click

Status > Trunk

in the navigation pane.

Figure 8

displays the configuration summary and status of a trunk named Trunk1. This trunk is

configured in dynamic mode and has 3 and 5 interfaces as its active members.

Figure 8 Trunk Page

Table 5 Trunk Port Configuration Fields

Description

Field

ID assigned to the trunk by the system when the trunk is created.

Trunk

User-created name for the trunk.

Name

Indicates whether the trunk is Static or Dynamic.

Type

•

Dynamic trunks use the Link Aggregation Control Protocol (LACP, IEEE standard
802.3ad). An LACP-enabled port automatically detects the presence of other
aggregation-capable network devices in the system and exchanges Link Aggregation
Control Protocol Data Units (LACPDUs) with links in the trunk. The PDUs contain
information about each link and enable the trunk to maintain them.

•

Static trunks are assigned to a bundle by the administrator. Members do not exchange
LACPDUs. A static trunk does not require a partner system to be able to aggregate
its member ports.

Displays whether the trunk has been enabled or disabled administratively. When
disabled, no traffic will flow. The messages that members of the trunk exchange in order

Admin Status

to manage the trunk (LACPDUs) will be dropped, but the links that form the Trunk will
not be released. The default is Enable.

Displays whether the link is up or down.

Link Status

Displays whether Static mode has been enabled on the trunk. When static mode is
enabled, the trunk does not transmit or process received LACPDUs. The member ports

Static Mode

do not transmit LACPDUs and all the LACPDUs it may receive are dropped. A static
trunk does not require a partner system to be able to aggregate its member ports.

List of member ports in the trunk.

Trunk Members

List all active member ports in the trunk.

Active Ports

For information on configuring trunks, see

“Trunk Configuration and Membership” (page 43)

.

MAC Table page

The MAC Table page displays the MAC addresses configured for ports, and the MAC type including
the maximum entries supported an d the current number of entries learned. The default aging
interval for forwarding database is 300secs. Dynamically learned entries are removed if they are
not updated within the aging interval on a particular interface.

To display the MAC Table page, click

Status > MAC Table

in the navigation pane.

MAC Table page

17

«
...
15
16
17
18
19
...
»

Содержание 1810-24








































































Отзывы:

Нет отзывов

Похожие инструкции для 1810-24

D DGS-3048 DGS-3048

Бренд: D-Link Страницы: 3

Бренд: KELCO Страницы: 22

Бренд: H3C Страницы: 204

H3C S7500E Series

Бренд: H3C Страницы: 44

H3C S7500E Series

Бренд: H3C Страницы: 11

H3C S7500E Series

Бренд: H3C Страницы: 25

Бренд: H3C Страницы: 46

Бренд: KanexPro Страницы: 16

SANbox 5600 Series

Бренд: Qlogic Страницы: 408

Бренд: Dexon Страницы: 31

FOS-3124 SERIES

Бренд: CTS Страницы: 223

Бренд: 3Com Страницы: 62

Elinx EIR510-2MC-T

Бренд: B&B Electronics Страницы: 107

Бренд: IPGARD Страницы: 2

START-LINE AGC-3500

Бренд: Trust Страницы: 16

IPES-5222T Series

Бренд: Lantech Страницы: 30

Бренд: LEGRAND Страницы: 140

Ethernet Networks and Web Management

Бренд: GarrettCom Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды