HP 12x Speed CD-ROM Disc Drive Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 62

background image



Hewlett-Packard Co. 1997

First Printing:

February, 1997

UNIX is a registered trademark in the United States and other countries, licensed exclusively through
X/Open Company Limited.

NOTICE

The information contained in this document is subject to change without notice.

HEWLETT–PACKARD MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be
liable for errors contained herein or for incidental or consequential damages in connection with the
furnishing, performance or use of this material.

Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is
not furnished by Hewlett-Packard.

This document contains proprietary information which is protected by copyright. All rights reserved.
No part of this document may be photocopied, reproduced or translated to another language without
the prior written consent of Hewlett-Packard Company.

RESTRICTED RIGHTS LEGEND. Use, duplication, or disclosure by government is subject to re-
strictions as set forth in subdivision (c) (1) (ii) of the Rights in Technical Data and Computer Software
Clause at DFARS 252.227.7013. Hewlett-Packard Co., 3000 Hanover St., Palo Alto, CA 94304.

10 9 8 7 6 5 4 3 2 1

«
1
2
3
4
...
»

Содержание 12x Speed CD-ROM Disc Drive































































Отзывы:

Нет отзывов

Похожие инструкции для 12x Speed CD-ROM Disc Drive

Clavinova CLP-240

Бренд: Yamaha Страницы: 24

EcoDrive P40 ED

Бренд: Pfaff Страницы: 28

Бренд: Plextor Страницы: 64

Бренд: IBM Страницы: 74

Бренд: TELUS Страницы: 49

Бренд: Baumuller Страницы: 176

Бренд: HAUTAU Страницы: 8

Бренд: IBM Страницы: 88

ThinkPad Multi-Burner Ultrabay Slim Drive

Бренд: IBM Страницы: 56

Бренд: Danfoss Страницы: 94

Бренд: ABB Страницы: 2

Бренд: Parker Страницы: 15

DYER CDP-TW 1600-BSY+

Бренд: D+H Страницы: 28

Бренд: Freecom Страницы: 17

Бренд: Nexus Страницы: 5

Бренд: LiftEquip Страницы: 23

Бренд: INOVU Страницы: 8

Бренд: Masterflex Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды