background image

6

 4 204 354 / 00

You should read these instructions thoroughly before the system is commissioned!

Dear Customer,

With the Hoval CompactGas

®

 you have acquired a product manufactured according 

to the state-of-the-art and highest quality standards.
Please ensure that the delivery is consistent with your order and check it is complete. 
Also check for possible damage in transit and inform the nearest Customer Service 
centre if there is any. For insurance reasons it will not be possible to accept any 
subsequent claims.
For the correct installation and operation of your Hoval CompactGas

®

 all applicable 

laws, regulations and standards must be complied with; in particular the regulations 
of the respective energy supply company. In case of queries, please contact your 
specialist installer or the nearest Hoval Customer Service centre.
Assembly  or  installation  of  the  heating  boiler  may  only  be  carried  out  by  trained 
personnel of an approved installation company. Before starting the boiler for the first 
time, an installation inspection and approval of the overall installation by the installer 
are required.
To guarantee safe and trouble-free operation, operate your Hoval boiler only according 
to these operating instructions.
The boiler may only be used for its intended purpose and fuels for which it is suitable 
on the basis of its design and for which it has been approved by Hoval.
Do not carry out any changes to the system, otherwise all claims under the guarantee 
will be invalidated. Conversion kits are to be installed and the installation approved 
by authorised installers or by the Hoval Customer Service.
The reliable and safe functioning of a oil boiler, as well as the achievement of an 
optimal effectiveness and clean combustion are only possible and guaranteed if the 
system is maintained and cleaned at least once every year.
In the event of a fault or in case of damage, please contact the Hoval Customer 
Service to inquire about the necessary repairs. In the meantime, shut down the unit 
to avoid any damage.
With  the  acquisition  of  a  Hoval  unit  you  also  obtain  a  comprehensive  guarantee 
protection, as indicated in the guarantee conditions of the guarantee pass for your 
unit.
This  guarantee  is,  however,  dependent  on  the  observance  of  the  operating  and 
installation  instructions  and  on  compliance  with  the  applicable  legal  regulations. 
Non-compliance with the above will invalidate all liability and warranty claims against 
Hoval.
Provided it is used correctly, your Hoval boiler will ensure you enjoy a well heated 
home for many years.

The Hoval Customer Service

If you have any doubts in regard to the operation of your Hoval boiler, or minor faults 
affect its correct functioning, please contact the nearest Hoval Customer Service 
centre. A telephone call is often enough when it comes to solving small problems. 
Our trained Customer Service staff will do everything in their hands to help you.
If a fault can not be solved in this way, a service technician will visit you in order to 
solve the problem. We hope you understand that, except in urgent cases, this is not 
always immediately possible.
Take advantage of the offer of the Hoval Customer Services for extending the service 
life of your Hoval boiler, and ask for a service agreement. Your Customer Services 
advisor will be pleased to give you information.
You will find the addresses on the last page.

3. 

Customer service

i

3. Customer service

Содержание CompactGas 200

















































Отзывы: