Hoval CompactGas 200 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 48

Hoval CompactGas 200 Скачать руководство пользователя страница 37

37

4 204 354 / 00

Note:

You can leave the manual operating mode and the emission monitoring mode
at any time by tapping of the operating mode key

� � �

(Return to basic dis-

play).

6.10.6 Manual operating mode

The following information is intended for the heating technician
only.

MANUAL
58.5 72.5

Start - Basic display

Press and hold for 5 seconds

Current boiler temperature

Boiler temperature setpoint

Set the desired boiler temperature by
turning the “rotary pushbutton”.

This function key is also used for emission measurement when it is
only pressed briefly.
- see installation instructions; combustion control.

All pumps are operating without restrictions. Available mixers are discon-
nected and can be operated manually, if necessary, depending on the heat
demand.

CAUTION:

- The DHW temperature reaches the level of the boiler temperature set-

point.

  Scalding hazard if temperature setting too high!
-  To protect underfloor heating systems against overheating during manual
  operation, it is necessary to implement appropriate safety measures (e.g.
  safety temperature limiter with pump switch-off ).

MO. 16. AUG.'04

14:00 62.5

C

i

i

i

6. Heating system control

«
...
35
36
37
38
39
...
»

Содержание CompactGas 200

















































Отзывы:

Нет отзывов