9 of 33
Indesit
Company
Service Manual UK
English
Standpipe
Note:
Ensure the standpipe has a minimum diameter of
38 mm.
The standpipe should be installed away from the
rear of the appliance.
1.
Ensure hooked end of drain hose is positioned
between 100 and 65 cm above the bottom of the
machine.
2.
Untie the end of the GREY drainage hose from
the rear of the appliance and place
approximately 100 mm into the standpipe or
sink trap spigot.
Ensure the drain hose is securely attached, to
prevent it coming away while the machine is in use
and causing a flood.
Sink Waste System Note:
Ensure the sink outlet pipe has a minimum diameter
of 32 mm.
1. Untie the end of the GREY drainage hose from
the rear of the appliance.
2. Reposition 'hooked end' support as required
along the GREY drainage hose.
3. If fitting an under sink waste disposal unit cut
out the membrane, bung or blanking plug.
4. Attach the GREY drainage hose to the under
sink waste disposal unit securely, using a
suitable hose clip.
5. Raise the hose to a minimum height of between
90 and 65 cm to avoid syphoning.
Ensure the drain hose is securely attached, to
prevent it coming away while the machine is in
use and causing a flood.
cut off end
Hose Clip
