19 of 33
Indesit
Company
Service Manual UK
English
CONTROLS INFORMATION
A single control board located at the back of the machine contains all the circuitry to control the
machine and interfaces with the programme selector, option buttons and LEDs located on the console
panel. The control board has an access port to the rear of the machine.
Programmes are selected by turning the rotary switch to one of the 16 positions. Special options can
be selected by pressing the appropriate buttons and the programme process followed by LEDs.
The machine is switched on using the On/Off button and selected programmes started by pressing the
Start/Cancel button.
MAIN BOARD PROGRAMMING - For Modules with fixed EEProm
PROGRAMMING (Using EMIT)
This machine can be programmed via the Emit, using a USB lead (Part number C00222800),
Hardware key (Part number C00115587) and the Memwriter software.
From Serial Number 80401.0000, the
module will always be supplied without
a programme when supplied as a spare
part.
NOTE:
This board does not have a
physically replaceable EEProm.
Programming a Main Board
There are a number of ways the board
can be programmed - some of which
are not applicable to certain markets.
Types of programming:
1.
Handheld Terminal (Not UK).
2.
Emit / Memwriter (UK Indesit
Service Engineers).
3.
Smart Reader & Smart Card
(certain areas of UK market) see
photo.
Smart Card
Smart Card
this card holds the
program file and can
only be used ONCE.
Reader
Black Hardware Key
USB - Serial Cable
A Hardware Key Pin is available
(order Part No. C00114723, Qty = 1).
