6 of 33
Service Manual UK
Indesit
Company
English
INTRODUCTION
A new range of Innovative Washing Machines with a large 11.0 kg load for the modern family.
New style Digit Control Display Panel to advise and update the customer on the machines options and
programme progress.
A range of new Wash Cycles including Steam Refresh, Darks, Anti Allergy and Ultra Delicates
programmes.
Programmes can be adjusted to suit the individual customer requirements.
Spin Speed and Temperature can all be fine-tuned.
A large drum porthole allowing easy laundry loading and unloading.
The soap dispenser is hidden and only revealed when the machines door is opened.
The programme start can be delayed.
Note:
This model is Cold Fill only.
Stand-by Mode:
The machine in compliance with the new 'Energy Saving Regulations' is fitted with an automatic
stand-by system which is enabled after 30 minutes if no activity is detected. Press the On/Off button
briefly and wait for the machine to start up again.
OPENING THE DOOR MANUALLY - ALL MODELS
To release the door if the machine fails during a cycle and the door will not open
•
Disconnect the machine from the electricity supply.
•
Lower the drain hose and remove the water from the machine into a suitable container.
•
Unclip the machine’s kickstrip using a flat bladed screwdriver to release the plastic clips.
•
Pull the tab now revealed outwards (Fig. A) until the plastic brace comes away. Then pull the
brace twice downwards (Fig. B) until a 'click' is heard, this indicates that the door is now unlocked.
•
It should now be possible to open the door.
•
If the door will still not open, repeat the above steps.
