1
4
GB
595 mm.
595 mm.
24 mm.
545 mm.
5 mm.
567 mm.
23 mm.
593 mm.
45 mm.
558 mm.
547
mm
. m
in.
I
ns
ta
ll
at
i
o
n
560 mm.
45 mm.
Before placing your new appliance into operation
please read these operating instructions carefully.
They contain important information for safe use, for
installation and for care of the appliance.
Please
k
eep these operating instructions for future
reference. Pass them on to possible new owners of
the appliance.
P
ositio
n
i
n
g
Keep pac
k
aging material out of the reach of
children.
It can become a cho
k
ing or suffocation
hazard.
see Precautions and tips
).
!
The appliance must be installed by a qualified
person in compliance with the instructions provided.
Incorrect installation may cause harm to persons,
animals or may damage property.
F
i
tt
ing
t
he
a
ppli
a
nce
Use the appropriate cabinet to ensure that the
appliance functions properly.
The panels adjacent to the oven must be made of
heat-resistant material.
Cabinets with a veneer exterior must be assembled
with glues which can withstand temperatures of up
to 100°C.
To install the oven
under
t
he
c
o
un
t
er
(
see diagram
)
and in a
ki
t
chen
uni
t
, the cabinet must have the
following dimensions:
!
The appliance must not come into contact with
electrical parts once it has been installed.
The consumption indications on the data plate have
been calculated for this type of installation.
Ven
t
il
at
i
o
n
To ensure good ventilation, the bac
k
panel of the
cabinet must be removed. It is advisable to install the
oven so that it rests on two strips of wood, or on a
completely flat surface with an opening of at least 45 x
560 mm (
see diagrams
).
C
en
t
ring
a
nd
f
a
s
t
ening
Position the 4 tabs on the side of the oven according
to the 4 holes of the outer frame. Adjust the tabs
according to the thic
k
ness of the cabinet side panel,
as shown below:
thic
k
ness of 20 mm: ta
k
e off
the removable part of the tab
(
see diagram
)
thic
k
ness of 18 mm: use the
first groove, which has already
been set in the factory (
see
diagram
)
thic
k
ness of 16 mm: use the
second groove (
see diagram
)
Secure the appliance to the cabinet by opening the
oven door and putting 4 screws into the 4 holes of the
outer frame.
!
All parts which ensure the safe operation of the
appliance must not be removable without the aid of a
tool.