21 of 22
Indesit
Company
Service Manual UK
English
X
Power Module
!
1.
Remove the back panel (B).
Ensure the module has electrically discharged for 5 minutes before moving to Step 2.
Refer to Important note above.
2.
Remove the screw or screws securing the module support to the cabinet.
3. Disconnect the wiring - it may be necessary to remove one of the plugs to extract the module from
its location.
IMPORTANT NOTE - AVOIDING ELECTRICAL DAMAGE TO THE MODULE
Before disconnecting any plugs it is advisable to note their locations.
4.
Lift module clear.
IMPORTANT NOTE
This appliance is manufactured with a '3 phase' motor
and uses a different type of power module.
This power board is fitted with a large aluminium heat
sink which remains live after the power is disconnected.
Under no circumstances should the board be removed
under the time shown below.
Alternative 'quick methods' of discharging the board
SHOULD NOT be used or attempted.
