22
HOW TO USE A CUSTOM PROGRAM
1. Press any button or begin pedaling to activate
the console.
See HOW TO ACTIVATE THE CONSOLE on page
14.
2. Select a custom program.
To select one of the two CUSTOM programs, first
press the CUSTOM/HEART RATE button repeat-
edly until the name of the desired custom program
appears in the main display. A profile of the resis-
tance settings of the program, the maximum
resistance level, the program time, and the maxi-
mum rpm setting for the program will also appear
in the display. Then, press the ENTER button to
confirm your selection.
Note: If only a level row of indicators appears
in the program profile, see HOW TO CREATE A
CUSTOM PROGRAM on page 21.
3. Enter your age.
See step 3 on page 17.
4. Enter your weight.
See 4 on page 17.
5. Press the START button or begin pedaling to
start the program.
Each CUSTOM program is divided into 30 one-
minute segments. One resistance setting and one
target rpm (pace) is programmed for each seg-
ment. Note: The same resistance setting and/or
target rpm may be programmed for consecutive
segments.
During the program, the program profile will show
your progress (see the drawing to the left). The
flashing column of the profile represents the cur-
rent segment of the program. The height of the
flashing column indicates the resistance level for
the current segment. At the end of each segment
of the program, a series of tones will sound and
the next segment of the profile will begin to flash.
If a different resistance level is programmed for
the next segment, the resistance level will appear
in the display for a few seconds to alert you. The
resistance of the pedals will then change.
As you exercise, keep
your pedaling pace
near the target rpm
setting for the current
segment, which is
shown in the main dis-
play.
IMPORTANT: The target rpm settings are
intended only to provide motivation. Your
actual pace may be slower than the target rpm
settings. Make sure to pedal at a pace that is
comfortable for you.
Profile
