User Manual: HotDog
TM
Veterinary Controller Page 5
Mounting the HotDog Controller to an IV Pole
After removing the controller from the box, it can be mounted to an IV pole. Place the Controller IV
pole clamp around the IV pole and turn the clamp handle clockwise until securely tightened. To
remove the Controller from the IV pole, turn the clamp handle counterclockwise until the unit
releases.
Caution
To prevent the IV pole from tipping, the Controller must be attached
at a height that provides stability. It is recommended to use an IV
pole with a minimum wheelbase radius of 35.6 cm (14 in) and to
mount the Controller no higher than 112 cm (44 in) from the floor.
Failure to properly mount the Controller may result in IV pole
tipping, catheter site trauma and patient injury.
Figure 1: HotDog Controller
Mounted on an IV Pole.
Control Panel Features & Operating Modes
Figure 2: HotDog Model WC5X Controls
