�
Operation and Setup
Working Parameters Display
Task Status
Present
Current
---
Capacity
__
Charged
Input
Voltage
Operating
Temperature
4D
5.26 mWh
•
Power output
Power Output Status Simple Operation
.----
Operation Time
Present
---
Power
Current Total
Battery
Voltage
Charged
--
-+-
---
Times
Input
Power
1. Connect power supply to the AC or DC port of the charger, wait for the system to
complete the self-checking, connect the device that requires charging to the output
of the charger in the standby interface;
2. In the standby state, short press Okey to pop up the "Task Settings" menu, set the
task to "Power supply" , adjust the task parameters, and short press O key to start
the task;
Information displayed in the lower half of the screen: input voltage, operating temperature, input voltage,
charged times
3. Short press the O key to pop up the "Adjust task" menu to reset the output voltage,
output power, or "stop" the task.
4. Long press Okey to stop the current task.
-
HGT;
I
H6 PRO AC/DC Smart Charger
