HOT TUBS Algonquin, Руководство пользователя

Страница: 30 / 40

CANADIAN HOT TUBS INC.
30
Instructions
1.
When all final connections are complete, raise the water level above the top
row of Jets.
2.
Make sure all valves are in the open position (handle in line with the hose).
3.
Drain any air from the system by loosening the air vent screw on the filter lid.
Quickly tighten it again when the water starts to escape.
4.
With the power on and the Jets on high, check all connections for leaks.
5.
When everything is complete, use the rolls of foil insulation and tape to
wrap all the plumbing.
6.
The roll-up cover has a “tail” which should be fastened to the surrounding
decking by three screws through one of the boards of the tail.
A manual has been included for the keypad controller and any other peripheral
equipment that has been provided. Please consult and familiarize yourself with
their operation.
Please contact Canadian Hot Tubs at 1-800-265-6355 if you have any
questions.
Click the link below to watch all the videos on our website:
www.canhottub.com/hottubassembly
PASSWORD: hottubassembly