Hospira GEMSTAR 13088-04-01, Руководство по эксплуатации системы

Страница: 75 / 161

4. Options Menu
68 Hospira GemStar Manual 430-10984-001 (Rev. 03/06)
Speed Protocol
1
Press [
OPTIONS
] and select
SPEED PROTOCOL
.
2
Press the number key for the desired protocol
function.
3
Follow the display messages. Refer to the
instructions for Speed Protocol functions for more
information.
Note: Up to nine speed protocols are stored at one
time. The speed protocols stay in memory, even when
the pump is powered down, until they are deleted.
Assign
1
Press [
OPTIONS
] and select
SPEED PROTOCOL
.
2
Select
ASSIGN
from the Speed Protocol menu.
3
Select [
1
]–[
9
] to assign to the new protocol.
If the selected speed protocol is already assigned, the pump displays
REPLACE
PROTOCOL ASSIGNMENT?
• Press [
YES/ENTER
] to replace the protocol. The pump displays the new speed
protocol and exits
OPTIONS
.
• Press [
NO
] to keep the existing protocol and exit
OPTIONS
.
Select this item from
the Speed Protocol Menu:
To do this function:
ASSIGN
Store a program in pump memory for later use.
REVIEW/RECALL Review assigned protocols from the
RUN
or
STOP
mode. Recall an assigned protocol from the
STOP
mode.
DELETE Delete protocols from pump memory.
1 REVIEW PROGRAM
2 HISTORIES
3 KEYPAD LOCK
4 PUMP SETTINGS
5 SET CLOCK
6 PRINT
7 SPEED PROTOCOL
430-10984-001.book Page 68 Friday, March 31, 2006 4:49 PM