Hospira GEMSTAR 13088-04-01, Руководство по эксплуатации системы

Страница: 58 / 161

Hospira GemStar Manual 430-10984-001 (Rev. 03/06) 51
3. Pain Management
3
Respond as follows:
Changing a Pain Management Program
To change a program:
1
From the
STOP
mode, press [
CHANGE
] and select
CHANGE PROGRAM
.
2
As each message displays, make the desired changes or press [
YES/ENTER
] to
accept the current setting.
3
Review the program. Press to begin review.
4
Press [
START
] to begin delivery.
To do this: Press this key:
Deliver the remaining loading dose amount
Clear the remaining loading dose amount
Can be changed at any time Cannot be changed
• Delivery rate
• Bolus
• Bolus lockout
• Container size
• Air sensitivity
• Dose limit amount
• Delivery mode
• Unit of measure
• Concentration
• Dose limit type
G
Note: You cannot change a program when the pump is in
FULL
or
CONTAINER
Lock. With a
RATE CHANGE
Lock, the continuous delivery rate and bolus amount
can be changed within the set ranges.
Although the delivery mode cannot be changed, if Cont Bolus is
programmed, the continuous rate or bolus amount can be changed to zero. The
minimum values set with a
RATE CHANGE
Lock could restrict this function.
430-10984-001.book Page 51 Friday, March 31, 2006 4:49 PM