Hospira GEMSTAR 13088-04-01, Руководство по эксплуатации системы

Страница: 52 / 161

Hospira GemStar Manual 430-10984-001 (Rev. 03/06) 45
Chapter 3
Pain Management
Therapy Features and Specifications
This therapy allows programming of a continuous only, bolus only, or continuous with
bolus delivery.
In Cont Bolus protocols, you can enter zero for either the continuous rate
or the bolus dose when entering or changing a program. The continuous rate and
bolus dose cannot be zero at the same time.
The default bolus delivery rate is 125 mL/hr.
The maximum continuous delivery rate is 25 mL/hr.
A loading dose may be set during programming, which can be delivered after
programming and priming are complete. The default loading dose rate is 125
mL/hr. Rate, bolus dose, concentration can be programmed in increments of 0.01.
Priming using [
PURGE
] is only allowed before [
START
] is pressed or after one of
the following events occur:
Complete Review of New Program
New Container
Air-in-Line Alarm
VTBI can be titrated.
CAUTION: When using PCA vials (except in a lockbox with a spring assist
mechanism), the system may underdeliver. System delivery
accuracy could be reduced by as much as 5%.
G
Note: The delivery rate is delivered in increments of .01.
G
Note: New Container is allowed only when at least 1/2 of the container volume has
been infused or 1 hour has elapsed since starting the infusion.
The use of a lockbox is recommended with pain management protocols. Refer to
Chapter 9 Optional System Components, page 109, for instructions on using a
lockbox with the GemStar® Pump.
430-10984-001.book Page 45 Friday, March 31, 2006 4:49 PM