Hoshizaki FTC-120 A Series, Инструкция по эксплуатации

Страница: 17 / 19

ENGLISH
14
IV. BEFORE CALLING A SERVICE AGENT
IMPORTANT
1. If the temperature display window on the
operation panel indicates an error code
or something seems wrong with the unit,
check for possible causes according to the
following instructions. If the problem still
exists, immediately contact an authorized
Hoshizaki service company.
2. When contacting a service company, let them
know the model name, serial number, date of
installation (see warranty card) and state of
the trouble.
3. Do not attempt to repair the unit yourself.
1. TROUBLES WITH ERROR CODE
INDICATION
When the temperature display window on the
operation panel flashes alternately between an error
code and the cabinet temperature, check the error
code and follow the instructions below.
1) If one of the following error codes is displayed,
immediately contact an authorized Hoshizaki
service company.
* Do not use the following items. They could damage
painted or plastic surfaces:
Polishing powder, alcohol, thinner, benzine, acidic
or alkaline detergent, hot water, petroleum, soap
powder, metal scourer or brush, etc.
Especially detergent to clean grease on ventilator
or microwave.
Fig. 14
Air Filter
(2) Attach to condenser
Magnet
Front Panel
Condenser
(1) Hook on condenser bottom
Note: Some solutions other than the above may
also damage painted or plastic surfaces.
Immediately stop using such solutions if
they cause any problems.
* The door gasket and its contact surface get
soiled easily. Clean every surface of these parts
thoroughly. Remnants of food will accelerate aging.
* Use a cloth to wipe off any water staying inside the
cabinet.
2. AIR FILTER
IMPORTANT
To prevent deformation, do not wash the air
filter with hot water above 40°C.
Plastic mesh air filters remove dirt or dust from the
air, and keep the condenser from getting clogged.
If the filters get clogged, the refrigerator/freezer’s
performance will be reduced.
Check the filter at least twice a month. When
clogged, use warm water and a neutral cleaner to
wash the filter. Do not operate the unit with the air
filter removed, or the condenser will get clogged,
resulting in failure.
1) Open the front panel, and remove the air filter. To
prevent injury, do not touch the condenser fins
directly.
2) Wash the air filter carefully with cold or warm
water containing the proper amount of neutral
cleaner. Rinse and dry the air filter thoroughly.
3) To refit the air filter, first hook it on the bottom
of the condenser, then attach the air filter to the
condenser.
4) Close the front panel.
Fig. 13
Fig. 12