ENGLISH
10
Fig. 7
CAUTION
Attach the shelf clips properly to make the
shelf level.
* To lay the shelf at the bottom of the cabinet, attach
two shelf holders each to the left and right frames
and one to the center frame as shown below.
IMPORTANT
Do not put anything at the bottom of the cabinet
to prevent damage or deformation to the
cabinet bottom, resulting in corrosion.
[b] RAIL (customized)
* To attach the rail, (1) push the rail hook backwards
to fit into the square hole in the rear shelf post, and
(2) push the rail hook down to fit into the square
hole in the front shelf post. To detach the rail,
reverse the above procedure. See Fig. 8.
CAUTION
Attach the rail properly to make it level.
4. ELECTRICAL CONNECTIONS
IMPORTANT
This refrigerator/freezer is provided with no
power switch or earth leakage circuit breaker,
but with overcurrent protection (fuse) only.
Install a switch rated at least 10A on the main
power supply.
(2) Insert
(1) Hook
(1)
(2)
Fig. 8
