Hoshizaki DCM-240BAF, Руководство по обслуживанию

Страница: 7 / 48

7
2. OPERATION - How it works
Water flows from the potable water source through the Water Supply Line Shut-off Valve,
enters at the Water Inlet fitting and into the Water Reservoir. The Water Reservoir func-
tions to maintain a constant water level inside the Freezer Assembly. Water from the
Water Reservoir enters at the bottom of the Freezer. Heat is removed by the refrigeration
process and ice forms inside the Freezer.
A stainless steel Auger, located inside the Freezer, is direct-driven by the Gear Motor, and
the rotating Auger carries the ice upward to the end of the Auger, where excess water is
pressed out of the ice, as the ice is extruded and broken into cubelet ice (compressed ice)
and then pushed out into the Storage Bin.
Moving the Power Switch and the Ice Making Switch, on the left of the Middle Front Panel,
to the “ON” position starts the automatic and continuous icemaking process. When the Ice
Storage Bin is filled with ice, the Bin Control Switch will shut off the icemaking process. As
the ice is removed from the Storage Bin, the Bin Control Switch resets automatically and
restarts the icemaking process.
Moving the Ice Switch and the Water Switch, located on the right of the Middle Front Panel,
to the “ON” and/or “OFF” positions gives the user a convenient 3-way dispensing.
The Agitator in the Storage Bin keeps the ice from clustering so that the ice can move
easily through the Spout.
Choice Ice Switch Water Switch
Ice Only
Water Only
Ice and Water ON
OFF
ON OFF
ON
ON
Fig. 2
A2AAA0269804