Hoshizaki DCM-240BAF, Руководство по обслуживанию

Страница: 46 / 48

46
10) Remove the Agitator and Drip Ring. See Fig. 6.
11) Pour the cleaning solution carefully into the Reservoir through the opening in the center
of the Storage Bin up to the overflow level. (Overflowed solution can be seen in the
Drain Pan.)
12) While waiting for 10 minutes to start icemaking process, wipe the Bin Liner and the
Drip Plate using a clean cloth containing the cleaning solution.
13) Move the Ice Making Switch and the Power Switch to the “ON” position, place the
Storage Bin Cover in position, and start automatic icemaking process. Run the ice
dispenser until it stops automatically.
14) Move the Ice Making Switch to the “FLUSH” position.
15) Pour clean warm water carefully onto the Bin Liner and into the Reservoir through the
opening in the center of the Storage Bin to melt the ice and rinse out the cleaning
solution.
16) After water has drained out of Drain Pan, turn Power Switch to the “OFF” position.
17) Wipe the Storage Bin Cover, the Agitator, the Drip Ring and Spouts (A) and (B) using
a clean cloth containing the cleaning solution.
18) Rinse the wiped parts with water.
CAUTION
Do not use ice produced with cleaning or sanitizing solutions. Be sure none
remains in the Storage Bin.
[b] SANITIZING PROCEDURE - Following Cleaning Procedure
1) Dilute approximately 1.5 fl. oz. of a 5.25% Sodium Hypochlorite solution (chlorine bleach)
with 3 gal. of water.
2) Pour the sanitizing solution carefully into the Reservoir through the opening in the center
of the Storage Bin up to the overflow level.
3) Wait for 10 minutes to start icemaking process. Move the Ice Making Switch to the “ON”
position, and start automatic icemaking process. Run the ice dispenser until it stops
automatically.
A2AAA0260312