Hoshizaki DBF-25SAC, Инструкция по эксплуатации

Страница: 35 / 36

32
ENGLISH
8) Rinse the beer tap thoroughly with clean water.
9) Assemble the beer tap properly by positioning the hole in the valve shaft (larger hole facing up).
6. KEG COUPLER (WEEKLY)
Clean the keg coupler in accordance with the beer company’s instruction manual.
7. EXTERIOR (WEEKLY)
The stainless steel exterior also needs cleaning to prevent possible corrosion. Wipe with a soft cloth. Use a soft damp cloth
containing a neutral dishwashing detergent to wipe off dirt buildup, and remove any remaining detergent. Clean the exterior
whenever necessary.
8. WIRE CONDENSER (BIANNUALLY)
Use a vacuum cleaner or toothbrush to remove dirt and dust from the wire condenser located at
the rear of the unit.
IV. INSPECTION
1. GAS HOSE AND BEER HOSE (MONTHLY)
Check the gas and beer hoses for damage, deformation, and water leak marks (stains). If any problem is found, contact an
authorized Hoshizaki service company.
2. ATTACHMENT PLUG AND POWER CORD (ANNUALLY / BIANNUALLY)
WARNING
Check periodically that the attachment plug blades and their vicinity are free of dust and that the attachment plug is securely
plugged into the receptacle. Dusty blades or loose connection may cause electric shock or fire.
Do not damage the power cord. It should not be additionally processed, jerked, bundled, weighed down or caught in. It could
cause electric shock or fire.
The unit must have a separate power supply. Branching off the power cord, using an extension cord, or sharing a single power
supply with other appliances may result in electric shock, heat generation or fire.
Check that:
* The attachment plug blades and their vicinity and the receptacle are free of dust. Clean them if necessary.
* The attachment plug and power cord are not damaged, weighed down or caught in.
* The attachment plug is plugged into a separate receptacle.
3. COOLING WATER (BIANNUALLY)
IMPORTANT
Replace the cooling water twice a year.
When removing the drain cap, do not pull the chain but pull the drain cap directly.
1) Unplug the unit.
2) Remove the top panel.
3) Check that the cooling water level is up to the standard water level marked on the tank. If it is insufficient, refill the water tank
with the cooling water.
To replace the cooling water:
4) Remove the drain pan.