Hoshizaki 877000901, Руководство по обслуживанию

Страница: 19 / 32

HOSHIZAKI EUROPE B.V.
The door hinge side can be changed without additional parts. The hinge brackets are asymmetrical, so you
must take special care to not get them mixed up – if in doubt, label them before making the modification.
Since physical strength is required to change the door hinges on two opposite ends
of the door, the door hinge change should be carried out by two suitably qualified
persons for safety reasons. Otherwise, there is a risk of injury and damage to the
device.
Change from DIN right to DIN left:
The door is turned by 180°, then the hinge brackets are moved diagonally, rotated by 180°. The doorcloser
is moved from the bottom right to the bottom left; the square with M8 internal thread is moved fromthe
top right to the top left.
Change from DIN left to DIN right:
The door is turned by 180°, then the hinge brackets are moved diagonally, rotated by 180°. The doorcloser
is moved from the bottom left to the bottom right; the square with M8 internal thread is moved fromthe
top left to the top right.
19
Change from DIN right to DIN left Change from DIN left to DIN right
Switching the door hinge side: