Hoshizaki 877000901, Руководство по обслуживанию

Страница: 20 / 32

HOSHIZAKI EUROPE B.V.
The following description applies to the modification from DIN right to DIN left. In the opposite situation,
the corresponding procedure is reversed.
1. Remove the fastening screw in
the middle at the bottom edge of
the machine box panel. 2. Fold the machine box panel
upwards and secure it against
folding back down using adhesive
tape or similar.
Risk of injury!
3. Open the door at an angle of
around 120°.
4. Remove the screw from the
door closer square at the bottom
right hinge.
(wrench size 8 mm). 5. Remove the fastening screw
(wrench size 13 mm) on the top
right hinge. 6. Pull out the door under the
top hinge bracket and lift it out
of the lower hinge bracket.
20