Hoshizaki 877000901, Руководство по обслуживанию

Страница: 14 / 32

HOSHIZAKI EUROPE B.V.
If required, the keypad can be unlocked by pressing any key for 4
seconds; “UnL” is displayed.
Briefly press the key ; the compressor indicator flashes and the temperature set point is
displayed. By briefly pressing or again, or after 15 seconds without pressing
any keys, the device returns to normal operation.
If required, the keypad can be unlocked by pressing any key for 4
seconds; “UnL” is displayed.
Briefly press the key ; the compressor indicator flashes and the temperature set point is
displayed; it can be changed via or . Press to save the value and leave the
parameter. You can leave and discard the change (escape) by pressing .
You switch on the cabinet by pressing the ON/OFF button for approximately 4 seconds.
flashes while it is being switched off. In standby mode, is constantly lit.
Indicator Description
AL Lower temperature
alarm, parameter “A1”, delay “A7”
AH Upper temperature
alarm, parameter “A4”, delay “A7”
dEF
Device is undergoing the defrost process (if
“D6”=“2”) or a reset to default factory settings
Id Door
alarm, parameter “Id”, parameter “i0”, “i1”
Pr1 Defective room sensor, emergency programme
parameter “C4”, “C5”
Pr2 Defective evaporator sensor, defrosting after time period
“d3”
14
Alarm and fault messages, display of the defrosting process
Switching off the device in standby mode:
Temperature setting (changing the set point)
Display of set temperature (set point)