horsch Maestro RC Central Fill 1230, Руководство пользователя

Страница: 54 / 108

54 Maestro RC Owner’s Manual – Ver. 2.1 10/2019
www.horsch.com
In Operation
• Check the area around the machine (for
children!) before setting off and starting
operation of the machine. Ensure sufficient
visibility!
• Stay clear of the operating range of
hydraulically operated parts.
• Passengers are not allowed to ride on the
machine during operation!
Transport/Installation
There is higher danger of accident during initial
installation. Please pay attention to the notes in
the corresponding chapters.
Delivery
The machine with implements is normally
delivered completely assembled on a low loader.
If parts or modules had to be disassembled for
transportation purposes, these will be
assembled by our distributor.
Depending on the design of the low loader the
machine can be unloaded with a tractor or needs
to lift off with suitable lifting gear (forklift truck or
crane).
Sufficient load bearing capacity of lifting gear
and lifting tackle must therefore be assured.
Lifting and latching points are identified by
labels.
When using other lifting points pay careful
attention to the center of gravity and the weight
distribution. These points must, in any case, only
be on the frame of the machine.
Installation
Instruction of the operation and initial installation
of the machine will be carried out by HORSCH
service representatives or distributors.
Any use of the machine without
dealer/distributor training is
prohibited!
The machine can only be released for operation
after the instructional session has been
conducted by our service engineer / distributor
and after the operating instructions have been
reviewed and read.
There is higher danger of
accident during installation
and maintenance. Before
performing any installation and
maintenance work or service,
make yourself familiar with the
machine and read the
operating instructions.
Depending on Scope of the
Equipment:
• Take loosely delivered parts off the machine.
• Check all important screw connections!
• Lubricate all grease fittings!
• Check air pressure in tires!
• Check all hydraulic connections and hoses for
correct fastening and function.
• Immediately rectify any occurring damage or
have it corrected by an authorized dealer!