HORNER HE-XP7E0, Руководство пользователя

Страница: 62 / 192

MAN1106-07-EN_XL+_UserManual
M a y 6
t h
, 2 0 2 0 P a g e 62 | 192
CHAPTER 7: CSCAPE CONFIGURATION
7.1 Overview
XL+ OCS hardware is programmed with a Windows based PC application called Cscape. This
application can be used to program, configure, monitor, and debug all aspects of the XL+ OCS
unit. Please see the on-line help provided with Cscape for additional details.
7.2 Cscape Status Bar
When the XL+ OCS is connected to a PC using Cscape software a Status Bar appears at the
bottom of the screen. The Cscape Status Bar can be used to determine if communications
have been established between the XL+ OCS and the Cscape program. Components of the
Cscape Status Bar are explained below.
Ready User: HE-XExx1-CsCAN
(Model=) Equal Local :1 Target :2(R) [no
forces] MOD
Figure 7.1 – Cscape Status Bar
Equal Indicator – indicates whether the current program in Cscape is equal to the program
stored in the Target Controller.
•
If Equal, the program in Cscape is the same as the program stored in the Target Controller.
•
If
Not Equal, the program in Cscape is not the same as the program stored in the Target
Controller.
•
If Unknown, there may have been a change since the last time the program in Cscape was
compared to the Target Controller.
Communications Status - indicates the current status of the
“pass through” Connector.
•
Local: xx – indicates the Network ID of the OCS to which
the Cscape program is physically connected through its
serial port. It can serve as a pass through device to other
nodes on the network.
•
Target: yy(R) – indicates the Network ID of the device with
which the Cscape program is exchanging data.
Note: The Local unit and Target unit can be the same
unit or they can be separate units.
The following are status indicators:
(R)
– Running
(D) - Do I/O
(I)
– Idle
(?) – Cscape is not communicating with the remote unit.
[no forces] – indicates no I/O has been forced.
Message Line -
The contents of
these messages
are context
sensitive. The
Message line can
be empty.
Current User -
indicates who is logged
(for security purposes).
Controller Model - Network (Model Confirmation)
• Controller Model indicates the controller model for
which the program in Cscape is configured.
• Network indicates the type of network that the
program in Cscape expects to use (e.g., CsCAN).
•
(Model Confirmation) provides the following
indications:
•
(Model=) – the actual Target Controller matches the
configured Controller Model and Network.
•
(Model Not=) – the actual Target Controller does not
match the configured Controller Model and Network.
•
(Model ?) – there may have been a change since the
last time the Target Controller was compared to the
configured Controller Model and Network.
File Modified Indicator - indicates that
the file in the selected window has
been modified but has not been saved.